Charger Operation -- General Information
As you use the SurePower Single Bay Charger, the unit will light its LEDs and issue audible
beeps to indicate various operational states. Generally, the charger will issue two beeps
whenever a fault condition occurs.
The following tables summarize what the LED and alarm activity indicates during different
operating modes. The charger light LEDs in one of two ways: Steady (persistent) or brief
(periodic).
Indicators When Powered On or Testing the Unit
Charger Operational State
No power to charger.
Charger powered on.
LED Test initiated (Test
button pressed, no battery
in charging bay).
Charger Unit Test
successful.
Charger Unit Test fails.
9650-000272-05 Rev. B
Charge LED
Ready LED
On
On
(brief)
(brief)
On
On
(brief)
(brief)
SurePower Single Bay Charger Operator's Guide
Charger Operation -- General Information
Test LED Fault LED
Power LED
On
On
(brief)
(brief)
On
On
(brief)
(brief)
On
(steady)
Audible
Alarm
On
1 Beep
(steady)
On
1 Beep
(steady)
On
(steady)
On
2 Beeps
(steady)
3-9