Testing The Battery Bay - ZOLL SurePower Single Bay Charger Operator's Manual

C 3 O
HAPTER PERATION

Testing the Battery Bay

In the SurePower Single Bay Charger, the control panel's LEDs can be tested to determine if
they are working correctly.
To test the control panel's LEDs, follow this procedure:
Step
1.
2.
3-8
Action
If there is a battery pack in the charging bay, remove it.
Press the Test Button on the battery bay's control panel.
The charger light all four LEDs for several seconds, and then extinguish them.
www.zoll.com 9650-000272-05 Rev. B