Advertisement
Section 1
General Information
3URGXFW 'HVFULSWLRQ
The ZOLL Base PowerCharger
management of Battery Packs used in ZOLL Medical Corporation resuscitation devices.
The ZOLL Base PowerCharger
performed by ZOLL Medical Corporation prior to device shipment. The Base PowerCharger
QuickCharge on the charger label directly beneath the product name.
$XWR7HVW
The ZOLL Base PowerCharger
battery has been depleted for 10 minutes or more) and illuminates the BATT. READY indicator when the battery is fully
charged. With AutoTest, the full charging cycle is complete in eight (8) hours or less for the PD4410/Smart Battery and fifteen
(15) hours or less for the XL Smart Battery. The AutoTest feature virtually eliminates the need to periodically test battery
capacity since this test is performed each time a battery is recharged. See the M Series Operator's Manual for battery run
time information.
4XLFN&KDUJH
The ZOLL Base PowerCharger
The full charging cycle is complete in four (4) hours or less for the PD 4410/Smart Battery and eight (8) hours or less for the
XL Smart Battery . The QuickCharge version provides no information regarding battery capacity because it does not test
capacity with each recharge. The ZOLL Base PowerCharger
battery test cycle at recommended intervals (see Manual Battery Testing Procedure) in order to confirm adequate battery
capacity.
+RZ WR 8VH 7KLV 0DQXDO
This manual provides information necessary for the use and care of the Base PowerCharger
thorough understanding of this information is required for proper charging and maintenance of ZOLL Batteries. Reliable
operation of ZOLL Medical Corporation resuscitation devices requires proper battery care.
6HFWLRQ 'HVFULSWLRQV
This manual is divided into five sections. The operator should read each section carefully.
6HFWLRQ *HQHUDO ,QIRUPDWLRQ
Provides Cautions, Warnings and a general product overview of the Base PowerCharger
specifications and important ZOLL service information.
6HFWLRQ 2SHUDWLRQ
Describes the function of all controls and indicator lights of the Base PowerCharger
PowerCharger
and provides charging and testing instructions.
1x1
6HFWLRQ 0DLQWHQDQFH DQG 7URXEOHVKRRWLQJ
This section describes several routine checks to assure proper unit operation. It includes cleaning and maintenance
instructions and troubleshooting guides intended for use by nontechnical personnel.
6HFWLRQ %DWWHU\ 0DQDJHPHQW
Provides information for determining your particular battery requirements and program implementation steps to setup a
comprehensive, effective and safe battery management program.
6HFWLRQ (0& 6SHFLILFDWLRQV
Provides detailed product information pertaining to EMC Emissions and Immunity testing.
1x1
(with QuickCharge or AutoTest) is a battery charger and testing system designed for
can be configured in either the AutoTest or QuickCharge mode. This configuration is
1x1
with AutoTest automatically tests battery capacity with each battery recharge (when the
1x1
with QuickCharge illuminates the BATT. READY indicator when the battery is fully charged.
1x1
with QuickCharge relies on the user to manually initiate the
1x1
. Discusses proper setup of the Base
1x1
is clearly labeled AutoTest or
1x1
and ZOLL Batteries. A
1x1
. Includes detailed product
1x1
1
Advertisement
