Indicators When Removing A Battery - ZOLL SurePower Single Bay Charger Operator's Manual

Indicators When Removing a Battery

Charger Operational State
Battery removed from bay -- No
charging fault detected.
Battery removed from bay --
charging fault detected.
Battery removed from bay -- not
fully charged.
Understanding the operation of the SurePower Single Bay Charger is essential to the effective
use of the charger. Knowing how to insert, test, and charge batteries, and understanding the
meaning of the LED's and alarms, enables you to provide fully-charged and functional batteries
for use with your ZOLL defibrillators and monitors.
Disabling/Enabling the Audible Alarm
You can disable and enable the charger's audible alarm.
To disable or enable the audible alarm, press and hold down the charger's Test button for at
least 10 seconds.
When you power on the charger, the audible alarm is enabled by default.
Warning! If the charger's LED's are not working, disabling the audible alarm will prevent you
from noticing a charging fault.
9650-000272-05 Rev. B
Charge LED Ready LED
SurePower Single Bay Charger Operator's Guide
Charger Operation -- General Information
Test LED Fault LED
Audible Alarm
2 Beeps
2 Beeps
3-11