ZOLL SurePower Single Bay Charger Operator's Manual page 25

Step Action
2. After you insert the battery, the charger begins charging the battery and lights the Charging
LED.
See the table at the end of this chapter for information on how the charger indicates its
operational state after you insert the battery.
3. Allow the battery time to charge.
The charging time will depend on the battery type, how depleted the battery was when you
put it into the charger, and which charging method the battery requires.
When the battery is fully charged, the charger lights the Ready LED.
Note:
If the battery fails the capacity test during testing, the SurePower Single Bay Charger
always lights the Fault LED.
9650-000272-05 Rev. B
Charging the SurePower and SurePower II Battery Packs
If you remove the battery before it is fully charged, the SurePower Single Bay
Charger beeps to alert you
SurePower Single Bay Charger Operator's Guide 3-3