Charger Operation -- General Information; Indicators When Powering On Or Testing The Unit - ZOLL SurePower Operator's Manual

Charger Operation -- General Information

As you use the
to indicate various operational states. Generally, the charger will issue two beeps whenever a
fault condition occurs.
The following tables summarize what the LED display and beeps indicate during different
operating modes. The charger lights LEDs in one of two ways: steady (persistent) or brief
(periodic).

Indicators When Powering On or Testing the Unit

Charger Operational State
No power to charger.
Charger powered on.
Charger Unit Test initiated
(TEST button pressed, no
battery in bay).
Charger Unit Test
successful.
Charger Unit Test fails.
9650-0535-01 Rev. C
SurePower Charger Station
Charge LED Ready LED
ON ON
(brief) (brief)
ON ON
(brief) (brief)
SurePower Charger Station Operator's Guide
Charger Operation -- General Information
, the unit will light its LEDs and issue audible beeps
Test LED Fault LED
ON ON
(brief) (brief)
ON ON
(brief) (brief)
ON
(steady)
Power LED Audible
Alarm
ON 1 Beep
(steady)
1 Beep
ON
(steady)
ON
(steady)
ON 2 Beeps
(steady)
3-7