Testing The Viewstation; Using The Viewstation - Polycom Viewstation 128 User Manual

Testing the ViewStation

Once you have your ViewStation set up, you can place a test call to one of the
numbers that have been preprogrammed into the address book of your
ViewStation. To go to the address book, highlight the Address Book icon on the
main calling screen and press the SELECT button on the remote. Use the arrow
buttons on the remote to select a location to call and press the SELECT button
on the remote to place the call.

Using the ViewStation

The main calling screen is the starting point for everything you do on the
ViewStation. If you want to place a call, add an entry to your address book, or
check your system setup, you will always start from the main calling screen.
The following sections describe the many features of the ViewStation.
ViewStation User's Guide
Getting Started
23