Programming A Monogram - Janome Memory Craft 6700P Instruction Book

z
x
c
e
v
w
b
n
e
e
e

Programming a Monogram

Example: To program "R&B"
z Press the mode key to enter mode 3.
q
Press the stitch display key.
q Mode key
w
w Stitch display key
x Turn the stitch length adjusting dial to select the letter
"R". Press the memory key.
e Memory key
c Press the memory key again.
The letter "R" has been registered.
v Press the stitch display key.
Turn the stitch width adjusting dial and stitch length
adjusting dial to select the letter "&".
Press the memory key.
b The letter "&" has been registered.
Turn the stitch width adjusting dial and stitch length
adjusting dial to select the letter "B".
Press the memory key.
n The letter "B" has been registered.
Start sewing.
The machine will sew "R&B" and stop automatically.
NOTE:
Turn the auto thread cutter function on (refer to page
34, "Auto thread cutting" section.) to cut the thread
automatically after the sewing.
94