Stitch Reference Chart - Janome Memory Craft 6700P Instruction Book

w q
w

Stitch Reference Chart

Attaching the stitch chart bracket
Align the screws with the holes on the backside of the
machine. Firmly tighten screws with screwdriver.
Stitch chart position
The stitch chart can be placed in two positions on the
chart bracket, store or view.
q Back slots
w Front slots
q
The back slots q on the bracket are for store position.
Slide stitch chart down between the back slots until the
stitch chart stops.
The front slots w on the brackets are for view position.
Pull up and out the stitch chart from back slots. Slide
stitch chart down between the front slots.
Clip board
Flip over the stitch chart (Mode 3 side) and then clip or
sewing instructions, notes, etc., to board.
NOTE:
Do not clip multiple layers of paper or cardboard.
Slide paper under clips; do not raise clips.
7