Janome Memory Craft 6700P Instruction Book page 25

m
.
m
, .
!3
!4
,
⁄0
!2
Threading the Machine (Continued)
m While holding the thread at the spool, firmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to draw it into the eye of the take-
up lever.
!2 Eye of the take-up lever
, Then pull the thread down along the left channel and
through the lower thread guide.
!3 Lower thread guide
. Slide the thread from the right of the needle bar thread
guide to the left.
Be sure to slide the thread to the end of the slit as
shown.
!4 Needle bar thread guide
⁄0 Thread the needle with the needle threader (refer to
the next page).
23