Screen Brightness; Buzzer Sound; Auto Thread Cutting; Needle Stop Position - Janome Memory Craft 6700P Instruction Book

Screen brightness (page 1/3)
The screen brightness can be adjusted from level 0 to 20.
The preset level is 10.
Turn the jog dial or press the arrow keys to adjust the

screen brightness.

Press the memory key to set the change.
q Memory key
q
Buzzer sound (page 1/3)
The level of the buzzer sound can be adjusted and you
can mute the buzzer in normal operation.
Turn the jog dial or press the arrow keys to select the
desired sound level; mute (OFF), low (1) normal (2) or
loud (3).
Press the memory key to set the change.
q q Memory key
NOTE:
Caution buzzer cannot be turned off.
Auto thread cutting (page 1/3)
To cut the threads automatically after locking stitches,
turn on the auto thread cutting.
When the auto-thread cutting function is turned on, the
thread cutter mark appears on the upper right corner of
the LCD screen.
q
Press the memory key to set the change.
q Memory key
Needle stop position (page 1/3)
The machine always stops with the needle in the down
position except when sewing buttonholes, specialty
stitches, monograms, etc. However, you can select the
needle stop position to up or down.
Turn the jog dial or press the arrow keys to select down
or up position.
q
Press the memory key to set the change.
q Memory key

Adjustable start-up speed (START/STOP key) (page

2/3)
The machine will start running slowly and the sewing
speed will gradually increase to maximum when pressing
the start/stop key.
You can select the desired start-up speed from slow (1),
normal (2) or high (3).
q
Turn the jog dial or press the arrow keys to select the
speed.
Press the memory key to set the change.
q Memory key
34