Janome Memory Craft 6700P Instruction Book page 48

z
q
x
c
y
u
r
w
t
e
Sewing
z Fold back the left seam allowance. Turn the right
seam allowance under to form a 0.2 to 0.3 cm (1/8˝)
margin. Place the zipper teeth next to the fold and pin
in place.
Set the stitch length and thread tension back to the
original setting.
q 0.2 to 0.3 cm (1/8˝) margin
w Zipper teeth
e Fold
r End of the zipper opening
t Opening size
x Attach the zipper foot.
Adjust the needle drop position to 7.5–8.5.
Lower the foot onto the topside at the end of the zipper
opening so that the needle pierces the fabric next to
the fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along
the side edge of the foot.
CAUTION:
Be sure that the needle do not strike the presser foot
when the zipper foot or zipper teeth is attached and
needle drop position is adjusted.
c Sew through all layers next to the fold.
Stop 5 cm (2˝) before zipper foot E reaches the slider
on the zipper tape.
Lower the needle slightly into the fabric.
Raise the foot and open the zipper to clear the slider.
Lower the foot and stitch the remainder of the seam.
y Slider
u 5 cm (2˝)
46