Auto-Off Timer; Reset All To Default - Janome Memory Craft 6700P Instruction Book

Auto-off timer (page 3/3)
The machine will be automatically turned off if you do not
use the machine within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
If you want to turn off the timer, turn the jog dials or press
and hold the arrow key until "OFF" shows in the timer
window.
Press the memory key to set the change.
q
To turn on the machine again, turn the power switch on.
q Memory key
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
Reset all to default (page 3/3)
The following customized settings can be reset to the
original settings (factory settings).
• Screen brightness
• Buzzer sound
• Auto thread cutting
• Needle stop position
• Adjustable start-up speed (START/STOP key)
q
• Adjustable start-up speed (Foot control)
• Favorite stitch adjustment (ON/OFF)
• Resume setting
• Bobbin winding speed

• Auto-off Timer

Meanwhile, the following settings remain the same;
• Language selection
• Saved favorite stitch adjustment values
The confirmation message appears.
Press the memory key to reset all the settings above to
default.
q Memory key
36