Adjustable Start-Up Speed (Foot Control); Favorite Stitch Adjustment (Fs); Resume Setting; Bobbin Winding Speed - Janome Memory Craft 6700P Instruction Book

Adjustable start-up speed (Foot control) (page 2/3)
The machine will start running slowly and the sewing
speed will gradually increase to maximum when pressing
the foot control.
You can select the desired start-up speed from slow (1),
normal (2) or high (3).
Turn the jog dial or press the arrow keys to select the
q
speed.
Press the memory key to set the change.
q Memory key
Favorite stitch adjustment (FS) (page 2/3)
If you want to save the changes to manual stitch settings,
turn on this option by turning the jog dials or pressing the
arrow keys.
If this option is turned off, the manual stitch setting will be
cleared when the power switch is turned off.
Press the numeral key "1" and the memory key to clear
the all manual stitch settings.
q
Press the memory key to set the change.
q Memory key
NOTE:
Favorite stitch option cannot be used in monogram
mode (mode 3).
Resume setting (page 2/3)
Turn on this option when you want to resume the last
pattern sewn before turning the power switch off.
Turn on this option by turning the jog dials or pressing the
arrow keys.
Press the memory to set the change.
q
When the power is turned on again, the confirmation
message will appear. Press the memory key to resume
the last pattern.
q Memory key
Bobbin winding speed (page 3/3)
The bobbin winding speed can be adjusted from 1 to 5.
The preset speed is 5.
Turn the jog dial or press the arrow keys to adjust the

bobbin winding speed.

Press the memory key to set the change.
q Memory key
q
Language selection (page 3/3)
You can choose one of the following 15 languages for
screen display.
• English
• French
• Dutch
• Swedish
q
• Danish
Turn the jog dials or press the arrow key to select the
desired language.
Press the memory key to set the change.
q Memory key
35
• Spanish • Finnish
• German • Italian
• Portuguese • Russian
• Polish • Turkish
• Norwegian • Japanese