Eyelet - Janome Memory Craft 6700P Instruction Book

q
q
w
S1
w
e r
e
S3

Eyelet

q Pattern:
w Presser foot:
e Thread tension:
r Foot pressure:
The eyelet is used for belt holes, etc.
Attach the satin stitch foot F.
To sew:
Place the garment under the foot and lower the needle to
the starting point.
Sew until the machine stops automatically.
q Starting point
Open the eyelet with an awl, puncher or pointed scissors.
To correct the shape of an eyelet:
If the eyelet is open w, turn the stitch length adjusting
dial counterclockwise (S1).
If the eyelet overlaps e, turn the stitch length adjusting
dial clockwise (S3).
NOTE:
The stitch width cannot be adjusted.
The shape can be adjusted within S1 to S3 (default
setting is S2).
70
MODE 2: 035
Satin stitch foot F
1-4
3