Using The Setup Wizard - Cisco rv 120w Quick Start Manual

Using the Setup Wizard

Follow these steps to use the Cisco RV 120W Setup Wizard. The Setup
Wizard displays on-screen instructions that guide you through the
installation, but you may find it useful to refer to this document during
installation.
You must connect one PC with an Ethernet cable for the purpose
N
OTE
of the initial configuration. After you complete the initial configuration,
administrative tasks can be performed using a wireless connection.
Starting the Wizard
Make sure that all of the network hardware is powered off, including
S 1
TEP
the Cisco RV 120W and cable or DSL modem.
Insert the CD that shipped with the Cisco RV 120W into the PC you
S 2
TEP
are using to configure the Cisco RV 120W. The Setup Wizard
automatically begins.
Click Start to begin the installation.
S 3
TEP
Click the check box to accept the software license agreement and
S 4
TEP
click Next.
The Setup Wizard verifies the network adapter on your PC is
S 5
TEP
functional. If you receive an error, view your PC's network
connections to make sure the network adapter is working and click
Back to test the connection again.
Next:
• If your network adapter is functional and you have not yet connected
your hardware, the Install Router window appears. (See
Your Hardware, page
• If your network adapter is functional, you have already connected your
hardware, and your Internet connection has been detected, the Secure
Your Router Settings window appears. (See
page 10.)
Cisco Small Business RV 120W Quick Start Guide
6.)
Connecting
Configuring Security,
5