Table of Contents
Advertisement
Keypad and Function Buttons
The Model 6292 can be operated and configured using the alphanumeric keypad.
The keypad enables you to name objects (groups of tests) and enter the date/time,
and the function buttons let you select a number of configuration settings.
The function buttons perform as follows:
•
CAPS LOCK when enabled (indicated by a green LED just above it) results
in all typed letters appearing capitalized on the display.
•
NUM LOCK when enabled causes the keypad to print numbers vs. letters.
•
MENU displays the main menu for configuration and instrument settings.
•
DEL erases characters.
•
SAVE saves the configuration or advances one menu level.
•
ESC aborts some functions or returns back one menu level.
•
MODE selects between Normal or BSG (both sides grounded) modes.
•
START starts a test.
•
STOP stops a test.
Rotary Knob
PRESS TO ENTER
SELECT / CURRENT ADJUST
Installing DataView
DO NOT CONNECT THE INSTRUMENT TO THE PC BEFORE INSTALLING THE
SOFTWARE AND DRIVERS.
Insert the USB stick into an available USB port (wait for driver to be installed).
1.
2.
If Autorun is enabled, an AutoPlay window should appear. If Autorun is
disabled, it will be necessary to open Windows Explorer, then locate and open
the USB stick drive labeled DataView to view the files on the drive.
3.
In the AutoPlay window, select Open folder to view files.
4.
Double-click on Setup.exe from the opened folder view to launch the
DataView
setup program.
®
The rotary knob has two primary purposes: (1) adjust
the current during a test, and (2) navigate through
menus and select options.
• When the main screen is displayed, a short press
will perform the MENU button function.
• When in a menu, rotating the knob navigates
through listed options; a short press selects the
highlighted option.
• When in a menu, pressing the rotary knob for two
seconds performs an ESC button function.
During a fixed current test, a short press will allow
manual adjustment of the test current.
®
Advertisement
Table of Contents
