Installation; Mechanical Installation - ABB COMMANDER 351 User Manual

5 INSTALLATION

EC Directive 89/336/EEC
In order to meet the requirements of the EC
Directive 89/336/EEC for EMC regulations, this
product must not be used in a non-industrial
environment.
Cleaning
Clean only the front panel, using warm water and a
mild detergent.
End of Life Disposal
This instrument does not contain any substance
that will cause undue harm to the environment.
However, the unit contains a small lithium battery.
This should be removed and disposed of
responsibly in accordance with local environmental
regulations. The remainder of the unit can be safely
considered as normal waste and disposed of
accordingly.

5.1 Mechanical Installation

5.1.1 Siting – Figs. 5.1 and 5.2
A – Close to Sensor
B – At Eye-level Location
C – Avoid Vibration
Fig. 5.1 General Requirements
Minimum
Sensor
0°C
Min.
A – Within Temperature Limits
0 to 90% RH
B – Within Humidity Limits
IP66/
NEMA4X
(front panel)
IP20
(rear)
C – Within Protection Rating Limits
+
Caution. Select a location away
from strong electrical and magnetic fields.
If these cannot be avoided, particularly in
applications where 'walkie talkies' are
used, connect using screened cables
within grounded metal conduit.
D – Use Screened Cables
Fig. 5.2 Environmental Requirements
55°C
Max.
71