Level C - Output Assignment Configuration - ABB COMMANDER 351 User Manual

4.8 Level C – Output Assignment Configuration
Note. The Output Assignment default settings are preconfigured to each template – see Table B, Output
Sources on the rear fold-out.
C. 0 0
LEV. C
ASSn
•1
C. 0 1
tYP. 1
ANLG
AN1. A
NONE
or
dIG
dG1. A
NONE
•1 If the output is assigned to a control output by the control type, the setting displayed cannot be changed – see
Section 4.2, Basic Configuration/Control Output Type.
4 CONFIGURATION MODE...
Level C – Output Assignment
Note. To select this frame from anywhere in this page, press and
hold the key for a few seconds.
Analog/Digital Output 1 (ao1/do1) Type
Select the output type for Output 1.
– Analog
ANLG
– Digital
dIG
Press to advance to
Press to advance to
Continued...
Analog Output 1 Assignment Source
Digital Output 1 Assignment Source
C.00, C01
.
.
61