Installing The Transmission - Yamaha YFM700RV 2009 Service Manual

1
3
6
b
a
2
5
4
d
c
4 - 85
TRANSMISSION
EBS00356

INSTALLING THE TRANSMISSION

1. Install:
• drive axle assembly 1
• main axle assembly 2
• shift fork "L" 3 (to drive axle)
• shift fork "C" 4 (to main axle)
• shift fork "R" 5 (to drive axle)
• shift drum 6
NOTE:
_
The embossed marks on the shift forks should
face towards the right side of the engine and
be in the following sequence: "R", "C", "L". Be
sure that the shift fork cam follower is properly
seated in the shift drum groove.
2. Install:
• counter axle assembly
NOTE:
_
• Engage the concave part a of the left crank-
case and convex part b of the counter axle.
• Align the edge height of reverse wheel gear
1 c and main axle/1st pinion gear d.
3. Check:
• shift operation
Unsmooth operation → Repair.
NOTE:
_
• Apply engine oil to each gear and bearing
thoroughly.
• Before assembling the crankcase, make
sure that the transmission is in neutral and
that the gears turn freely.
ENG