SWINGARM AND DRIVE CHAIN
EBS00493
NOTE:
Before removing the drive chain and the
sprockets, measure the drive chain slack and
a 15-link section of the drive chain.
EBS00494
REMOVING THE SWINGARM
1. Check:
M
a. Check the tightening torque of the pivot
b. Check the swingarm side play È by moving
c. Check the swingarm vertical movement É
L
2. Remove:
EBS00495
CHECKING THE SWINGARM
1. Check:
7 - 67
• swingarm free play
MMM
M MMM
M
M MMM
M
M MMM
shaft nut.
Pivot shaft nut
100 Nm (10.0 m · kg, 72 ft · lb)
it from side to side.
If side play is noticeable, check the spacers,
bearings, bushings and frame pivot.
by moving it up and down.
If vertical movement is tight or rough, or if
there is binding, check the spacers, bear-
ings, bushings and frame pivot.
LLL
L LLL
L
L LLL
L
L LLL
• pivot shaft nut
• washer
• pivot shaft
• swingarm
• swingarm
Bends/cracks/damage → Replace.
CHAS
M
M MMM
M
M MMM
M
L
L LLL
L
L LLL
L
MMM
LLL