3
1
2
4
CHANGING THE COOLANT/
CHECKING THE COOLING SYSTEM
a
5
6
3 - 36
14.Fill:
• coolant reservoir
(with the recommended coolant to the maxi-
mum level mark a)
15.Install:
• coolant reservoir cap
16.Start the engine, warm it up for several min-
utes, and then stop it.
17.Check:
• coolant level
Refer to "CHECKING THE COOLANT
LEVEL".
NOTE:
_
Before checking the coolant level, wait a few
minutes until the coolant has settled.
EAS00104
CHECKING THE COOLING SYSTEM
1. Remove:
• seat
• front fender
Refer to "SEAT, FENDERS AND FUEL
TANK".
2. Check:
• radiator 1
• radiator outlet hose 2
• radiator inlet hose 3
• water pump assembly 4
• water jacket inlet housing 5
• water pump outlet hose 6
Cracks/damage → Replace.
Refer to "COOLING SYSTEM" in chapter 5.
3. Install:
• front fender
• seat
Refer to "SEAT, FENDERS AND FUEL
TANK".
CHK
ADJ