1
2
1
CHANGING THE ENGINE OIL
1
1
1
3 - 26
EBS00067
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• engine oil filler bolt 1
• dipstick 2
4. Remove:
• engine oil drain bolt (oil tank) 1
(along with the washer)
5. Remove:
• engine oil drain bolt (crankcase) 1
(along with the gasket)
6. Remove:
• oil filter element drain bolt 1
7. Drain:
• engine oil
(completely from the oil tank and the crank-
case)
8. If the oil filter element is also to be replaced,
perform the following procedure.
M
MMM
M MMM
M
M MMM
M
a. Remove the oil filter element cover 1 and
oil filter element 2.
b. Check the O-rings 3 and replace them if
they are cracked or damaged.
CHK
ADJ
M MMM
M
M MMM
M
M MMM
M
MMM