Assembling The Rear Brake Caliper - Yamaha YFM700RV 2009 Service Manual

1 New 2 New
1
b
a
b
FRONT AND REAR BRAKES
1
a
1
b
c
a
1
2
1
7 - 39
EBS00432

ASSEMBLING THE REAR BRAKE CALIPER

WARNING
_
• All internal brake components should be
cleaned and lubricated with new brake
fluid only before installation.
Recommended brake fluid
DOT 4
• Replace the caliper piston seal and dust
seal whenever a brake caliper is disas-
sembled.
1. Install:
• caliper piston seal 1
• dust seal 2
New
2. Install:
• brake caliper piston 1
Turn the brake caliper piston clockwise until
section a of the brake caliper piston is level
with the surface of the brake caliper body.
NOTE:
Align an end b of the groove in the brake cali-
per piston with the punch mark c on the brake
caliper body.
3. Install:
• parking brake shaft 1
NOTE:
When installing the parking brake shaft, the
punch mark a should be between the marks
b with the parking brake shaft fully turned in.
4. Install:
• rubber boot 1
• parking brake arm 2
NOTE:
When installing the parking brake arm, turn the
parking brake shaft clockwise and align the
punch mark a on the parking brake arm with
the punch mark b on the parking brake shaft.
CHAS
New