Table of Contents
Advertisement
Configuration Display page
Clicking on Details from the Health and Status
Monitor page gives you added information about
various aspects of the FastStream and attached
storage. Click on the arrow next to the group you wish
to view.
• RAID Groups: RAID Group names, RAID
status, available Hot Spares, number of drives,
RAID Level, number of partitions, Interleave and
total capacity of each RAID Group
Exhibit 6.0-5 The Configuration Display Page.
SCSI Enclosure Services (SES)
Drive enclosures may have a SCSI Enclosure
Processor which indicates enclosure health status,
drive identification and drive fault identification.
The ATTO FastStream recognizes drive enclosures
that provide SCSI Enclosure Services (SES).
Use SES to identify individual drives, all the drives in
the same enclosure, all the drives in a single RAID
• Partitions: RAID Group name, partition ID,
capacity, block size and mapping.
• Drives: Drive configuration by port, including
drive size and status, with additional information
by mousing over individual drives.
• Interfaces: Ethernet management port link
status, Fibre Channel port link status, speed,
connection mode, Node Name and Port Name
(if applicable), SAS connector and PHY link
status, speed and SAS address (if applicable).
Group, or faulted drives, and to monitor the status of
enclosure power supply(s), fan(s) and temperature
sensor(s).
Clicking on Details from the Health and Status
Monitor page for enclosure status gives you the
Enclosure Services (SES)
SCSI
on page 32.
31
Advertisement
Table of Contents
