ATTO Technology SC 5550E Installation And Operation Manual page 63

Symbol/Abbreviation
GroupName
MemberIndex
mp1
PartitionIndex
CLI error messages
The following error messages may be returned by the Command line Interface:
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID Member index
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command Line
Interface commands, their defaults, and an example of
how to enter the commands. Commands which have
no default values have a blank entry in that column of
the table.
CAUTION CAUTION
Do not use CLI unless you are directed to
by an ATTO technician.
Command
AutoMap
AutoResume
BlockDevClean
BlockDevIdentify
BlockDevIDStop
BlockDevInfo
BlockDevScan
BootDelay
BootOldestImage
BridgeModel
viii
ATTO Technology Inc. FastStream SC Installation and Operation Manual
Indicates
The name of the RAID Group, designated by the user, to which a block
device is assigned. Use
Index designation of a RAID Group member as found by using the
RMStatus command
Ethernet port used to manage the FastStream
Index designation of a partition as found by using the
command
Default
5
RGDisplay to discover RAID Group names
Changing parameters may cause loss of
data and/or disruption to performance and
reliability of the FastStream.
The ExpressNAV Storage Manager is the
preferred method to operate and manage
the FastStream. Refer to
on page 43 for details.
Example
automap
set autoresume all disabled
blockdevclean 30
blockdevidentify alpha 3
blockdevidstop
blockdevinfo
blockdevscan
set bootdelay 25
bootoldestimage
get bridgemodel
PartitionDisplay
Interface Options