ATTO Technology SC 5550E Installation And Operation Manual page 18

6 Plug each of the Power Modules' power cord
into the Non-Volatile Module (on the RAID
controller). The plugs are keyed so that they
can only be plugged in one way. Make sure that
both plugs are fully inserted.
7 Finish assembling your storage controller.
Exhibit 2.2-1 FastStream SC RAID controller components, dimensions and mounting holes. For pinout
information, refer to Reference Charts
12
ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual
on page xxviii of the Appendix.
WARNING
Be careful handling the Power Modules after
they have been installed and powered. They may
contain an active power charge. If the board is
mishandled while they are attached it may
become shorted and/or damaged.