Table of Contents
Advertisement
Field Replacement Unit (FRU)
In the rare case that a FastStream must be replaced
due to failure or upgrade, restoring a configuration file
is a time saving tool to get storage back up and
running quickly.
1
Disconnect cables and remove the original
FastStream Storage Controller.
2
Connect the New FastStream by following
steps 1-10 in
Installing the FastStream
10.
3
Upload your saved configuration file following
steps 1-7 in
Saving or restoring a FastStream
configuration file
on page 43.
4
Restart your FastStream.
44
ATTO Technology Inc. FastStream SC Installation and Operation Manual
Once the FastStream comes online, you will have full
access to all of the RAID Groups and data created with
the previous FastStream.
Note
All user data, RAID Group information and
metadata is stored on the disk drives. If a
on page
FastStream fails, all of the data remains intact
and will be readily available once the
FastStream is replaced.
Advertisement
Table of Contents
