Installation Instructions; Slicer Installation - Oliver 732-N User's Operating And Instruction Manual

Slicer Installation:

Before starting the Installation process make sure you observe the following three
caution notes.
BEFORE PLACING THE SLICER ON THE TABLE OR COUNTER MAKE SURE THAT
IT CAN SUPPORT THE SLICER'S WEIGHT WHICH IS APPROX. 250 POUNDS.
Select a location for your slicer which has a substantial mounting surface, (see the
caution note above), and which has electrical service compatible with the load the
machine will place on it as indicated on the electrical data plate of the machine.
Position the machine while it is still in its packaging as close as possible to the desired
end location. Expose the machine by removing the outer packaging and remove its
crumb tray. Using at least two people, (one in the front and one at the back of the
machine), lift the slicer from the resting surface of the packaging and set the machine
onto the counter or table as close as possible to the desired end location. Make final
location adjustments by sliding the machine to its desired location.
0732S20004
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

INSTALLATION INSTRUCTIONS

THE SLICER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING.
KEEP BACK STRAIGHT, KNEES BENT, AND LIFT WITH LEGS.
USE GLOVES TO PROTECT HANDS.
NEVER LIFT THE SLICER BY ITS SIDE COVERS.
732-N Front Load Slicer
CAUTION
CAUTION
CAUTION
3-1