Oliver 732-N User's Operating And Instruction Manual page 15

732-N Front Load Slicer
Removing The Blade Frames (Continued)
NOTE
DO NOT LOOSEN THE NUTS WHICH SECURE THE ECCENTRIC PINS.
Pull the clip from the eccentric pin and slide the link toward the eccentric pin mounting
plate. See the illustration below.
After removing the pair of locking cams, eyebolts and Belleville washers, (which secure
each blade frame to the rocker's swing shaft), the blade frame can be lifted from the
machine. The eyebolts and Belleville washers can be removed by turning them counter
clockwise once the cams have been removed.
Continued
0732S20007 6-2
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor