Lubrication; Cleaning - Oliver 732-N User's Operating And Instruction Manual

732-N Front Load Slicer

Lubrication

WARNING
ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY TYPE OF MAINTENANCE TASK.
Once a month put a drop of a food approved lubricant on the plastic links at the top of
the blade frames. Also add a drop or two to each bushing on the pusher drive cross
shaft and lever shaft. All other bearings are either grease packed or sealed and seldom
need attention.
NOTE
NEVER OIL OR GREASE THE MOTOR.

Cleaning

Use a mild detergent solution to clean the exterior surfaces and empty the crumb tray
daily or as necessary. Periodically remove all covers and brush or blow, (if compressed
air is available), all foreign material from all surfaces, especially moving parts.
0732S20007 6-15
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor