www.zyxel.com
3.4.2 Configure Load Balance to "by Traffic Level"
1 Go to CONFIGURATION > Wireless > AP Management > AP
Group, click default for editing.
In Load Balancing Setting, check Enable Load Balancing and
Disassociate station when overloaded. Select Mode to by
Traffic Level and set the Traffic Level. Click Override Member
AP setting. Click Yes.
For load balancing by traffic level, the total throughput is
defined as High: 35Mbps; Medium: 23Mbps; Low: 11Mbps.
When total throughput of connected stations exceed the
selected traffic level, AP disconnects clients with the longest
idle time first, and then with the poorest signal strength.
76/225