2.4 How to Set up Seamless Wireless Roaming?
The example instructs how to configure two APs profile and topology for
roaming. These two APs need to use the same SSID, security, DHCP
server, and signal overlap. The two APs have the same DHCP server
from USG, and this example shows how to configure APs in the same
SSID and security.
Figure 7 Roaming from AP1 to AP2
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG20v2 (Firmware Version: V4.15), NXC5500 (Firmware
Version: 5.10), GS2210-8HP (Firmware Version: V4.30)
www.zyxel.com
.
51/225