2.1.1.1 Configure NXC's Interface to Go to Internet
1 Connect NXC controller to USG LAN port. In the USG, all
LAN ports are DHCP server for interface LAN, VLAN10,
VLAN20, and all the stations connected to APs get an IP
from the USG.
2 In the NXC, go to CONFIGURATION > Network > Interface >
VLAN to set the NXC's IP address to be in the same subnet as
the USG's LAN IP and have the USG act as the gateway
Double click vlan0 to edit IP Address Assignment section.
Click OK.
www.zyxel.com
.
18/225