4.3 How to Configure 802.1x to Secure the Wireless
Environment with an External LDAP Server?
The example instructs how to set up the NXC controller with an external
LDAP server. When the station wants to connect with the AP, you can
use an AAA server to provide access control to your network. In this
example, the LDAP server is external but not embedded in NXC
controller, and the controller is already set to use the LDAP server for
authentication.
Figure 14 Set up AP/NXC with an External LDAP Server
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG20v2 (Firmware Version: V4.15), NXC5500 (Firmware
Version: 5.10), GS2210-8HP (Firmware Version: V4.30)
www.zyxel.com
.
103/225