4.6.1.3 Configure AP Profile when USG is the Gateway
1 To make sure the USG is the gateway for vlan0 interface which
is for client accessing the Internet, go to CONFIGURATION >
Network > Interface > VLAN > vlan0 > Edit, enter USG‟s IP in
Gateway. Click OK to apply settings.
2 Go to CONFIGURATION > Object > AP Profile > SSID > SSID List,
click Add to add a SSID for captive portal. Key in the SSID to
CP_guest, and change Security Profile to default which sets
none security. change Forwarding Mode to Tunnel Mode and
click OK to save.
3 Go to CONFIGURATION > Wireless > AP Management > AP
Group, select the default AP profile and edit. Select #1 to
www.zyxel.com
140/225