Optimize the Wireless Environment
3.1 How to Set up User Ratio of 2.4GHz and 5GHz to Avoid WiFi
Congestion?
The example instructs how to configure AP profile with band select.
When 2.4GHz and 5G capable users connect to the AP, user is easy to
connect to 5GHz when enabling band select. This example uses band
select to balance wireless band, 2.4GHz and 5GHz.
Figure 8 Configure AP profile with Band Select
Note:
All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG20v2 (Firmware Version: V4.15), NXC5500 (Firmware
Version: 5.10), GS2210-8HP (Firmware Version: V4.30)
www.zyxel.com
.
59/225