Configure Captive Portal - ZyXEL Communications NXC 2500 Handbook

www.zyxel.com

4.6.3.5 Configure Captive Portal

1 Go to CONFIGURATION > Captive Portal > Redirect on
Controller > Authentication Policy Rule, click add to create a
policy rule for guests whose IP addresses are in the setting
range.
In User Auth Policy, change Source Address to QR_Guest_addr
and Authentication is required. Check Force User
Authentication to force every connected IP in the range to be
redirected to captive portal. Change the Authentication
Method to default.
In Authentication Type, use the Internal Web Portal.
168/225