2.3.4 What Could Go Wrong?
1 If the ZyMesh profiles are not the same on root AP and
repeater AP, it‟s not able to connect using ZyMesh successfully.
Go to CONFIGURATION > Wireless > AP Management > Mgnt.
AP List to make sure root AP and repeater AP‟s ZyMesh profile
are the same.
2 When ZyMesh set up, the repeater AP‟s throughput is lower
due to path loss.
3 When ZyMesh set up, the repeater AP‟s uplink port is down to
avoid loop. It is able to bridge via uplink port by checking
Enable Wireless Bridging in repeater AP‟s setting. The repeater
AP can still transmit data through its Ethernet port.
www.zyxel.com
49/225