Windhager BioWIN XL Operating Manual page 38

2. Operation
Confirm the selected sub-menu "Time profile feed" by
pressing the choose button – Fig. 79.
"With enable time"
The start and end of the enable time frame can be set in the
"Time profile feed" menu option, if the "Feed with enable
time" setting is active in the "Feed operating mode" menu
option (see section 2.8.1.3).
Factory setting "Feed with enable time:"
Start: 7:00 am
End: 10:00 pm
Use the arrow buttons to select and change the "Start" or
"End" times – Fig. 80.
Confirm the selected time by pressing the choose button –
Fig. 81.
Press the + or – buttons to change the time in 1 minute´
increments – Fig. 82.
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Fig. 79
Feed with enable time
Start
End
Fig. 80
Feed with enable time
Start
End
Fig. 81
Feed with enable time
Start
End
Fig. 82
38
choose back
07:00 am
10:00 pm
save back
07:00 am
10:00 pm
choose back
07:00 am
10:00 pm
– save back +