Dimm Slot Locations; System Maintenance Switch - HP ProLiant DL160 Gen9 Maintenance And Service Manual

Item
29
30
31
32
33
* For more information on the riser board slots supported by the onboard PCI riser connectors, see "PCIe
riser board slot definitions (on page 92)."

DIMM slot locations

DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use
the letter assignments for population guidelines.

System maintenance switch

Position
S1
S2
S3
S4
S5
S6
S7
S8
S9
Description
NMI header
TPM connector
Secondary PCIe riser board connectors*
System maintenance switch
FlexibleLOM sideband signal connector
Default Function
Off Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
Off Off = System configuration can be
changed.
On = System configuration is locked.
Off Reserved
Off Reserved
Off Off = Power-on password is enabled.
On = Power-on password is disabled.
Off Off = No function
On = ROM reads system
configuration as invalid.
Off Off = Set default boot mode to UEFI.
On = Set default boot mode to legacy.
— Reserved
— Reserved
Component identification 94