System Board - HP ProLiant DL160 Gen9 Maintenance And Service Manual

Remove the front I/O module panel.
a.
Disconnect the front I/O module from the system board.
b.
Detach the ambient thermal sensor cable from its clip.
c.
Remove the screws and disconnect the front I/O module connectors from the front panel.
d.
To replace the component, reverse the removal procedure.

System board

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives, power
input modules, and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, take the appropriate anti-static
precautions before beginning any system installation. Improper grounding can cause
electrostatic discharge.
Removal and replacement procedures 67