HP ProLiant DL160 Gen9 Maintenance And Service Manual page 42

Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 27).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Remove the PCI riser cage (on page 30).
5.
Disconnect the SATA cables from the M.2 SSD enablement board.
6.
Remove the M.2 SSD enablement board.
7.
Slot 3
o
Slot 2
o
("Access panel" on page 34).
Removal and replacement procedures 42