Controls And Functions - Samson SM10 Owner's Manual

Controls and Functions

5. MUTE/CLIP/MIX B – This switch will flash RED when the channel
input signal peaks. To reduce distortion, turn the Volume
control counterclockwise until the clip indicator does not light
during normal use. When the switch is depressed the channel's
signal path is interrupted to the main mix and the channel is
assigned to the MIX B bus.
6. LINE IN VOLUME – The SM10 features two additional stereo Line
Inputs (channels 9 and 10) which can be used to return the
outputs of the an external effects processor, or to connect the
output of any stereo line level device to the main mix.
7. MON Send – The MON signals (see #3) from input channels
1-8 are mixed together and sent to the MON Outputs. Use the
MON send control to set the amount of signal being sent to the
MON Output.
19
8. EFX SEND – The EFX signals (see #4) from input channels 1-8 are mixed
together and sent to the EFX Output. Use the EFX level controls to set the
amount of signal being sent to EFX Output.
8
6 7
8
18
17
9
10