Samson SM10 Owner's Manual page 5

Introduction
The Samson SM10 rack mount mixer is a versatile tool for many sound
applications. The SM10 mixer features eight independent stereo line input
channels, and includes two channels with XLR microphone preamps. There are
also two additional line inputs with stereo 1/4" jacks and level controls that can
be used to daisy-chain SM10 mixers together. The SM10 features a multitude of
signal routing options, with Monitor (Pre-Fade), EFX (Post-Fade), and Mix B sends
on Channels 1-8. The Master section of the SM10 features expanded monitoring
capabilities. The headphone output and meter bridge can be selected to monitor
the MON out, EFX out, Mix B, or Main output. There is also an extra MON output
with level control for quick patching to the MON send without having to go to the
rear panel. Built into a single space 19-inch rack with internal power supply, the
SM10 is reliable for any installation and rugged enough to be used on the road.
In these pages, you'll find a detailed description of the features of the SM10 rack
mount mixer, as well as a guide to its control panel, instructions for setup and use,
and full specifications. You'll also find a warranty card enclosed. Please don't forget
to fill it out and mail it in so that you can receive online technical support, and so
that we can send you updated information about this and other Samson products
in the future. Also, be sure to check out our website (www.samsontech.com) for
information about our full product line.
With proper care, your SM10 will operate trouble-free for many years. We
recommend you record your serial number in the space provided below for future
reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
Should your unit ever require servicing, a Return Authorization number (RA) must
be obtained before shipping your unit to Samson. Without this number, the unit
will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-6766)
for an RA number prior to shipping your unit. Please retain the original packing
materials and if possible, return the unit in the original carton and packing
materials. If you purchased your Samson product outside the United States,
please contact your local distributor for warranty information and service.
SM10 5