Mitsubishi Electric FR-E 500 Instruction Manual page 176

"
When not adjusting the gain voltage
"
When adjusting any point by applying a voltage
"
When adjusting any point without applying a voltage
(5)-1) How to adjust the gain frequency only without the voltage being adjusted
"Analog voltage
value (%) across
terminals 2-5
Hz RUN
A MON
PU EXT
(5)-2) How to adjust any point by applying a voltage across terminals 2-5
(e.g. from the external potentiometer) (current: across terminals 4-5)
(
when applying 5V
"Analog voltage
value (%) across
terminals 2-5
Hz RUN
A MON
PU
EXT
& To (5)-1)
"Press the
or
the current analog voltage adjustment.
Press for 1.5 s
SET
Flicker
)
"Apply a 5V voltage.
(Turn the external potentiometer
connected across terminals 2-5 to maximum.)
Press for 1.5 s
SET
Flicker
161
& To (5)-2)
& To (5)-3)
key once to display
Example: When analog voltage
adjustment value is 100% (5V)
go to (6)
When the potentiometer is
at the maximum position,
the value is nearly 100 (%).
PARAMETERS
go to (6)
4