Parameters - Mitsubishi Electric FR-E 500 Instruction Manual

C H A P T E R 4
CHAPTER 4
P A R A M E T E R S

PARAMETERS

This chapter explains the "parameters" of this product.
With the factory settings, the inverter is designed to perform
simple variable-speed operation. Set necessary parameter
values according to the load and operating specifications.
Always read the instructions before using the equipment.
4.1 Parameter List .......................................................... 60
4.2 Parameter Function Details ...................................... 69
Note: By making parameter setting, you can change the functions of
contact input terminals RL, RM, RH, MRS, open collector
output terminals RUN, FU, and contact output terminals A, B,
C. Therefore, signal names corresponding to the functions are
used in the description of this chapter (except in the wiring
examples). Note that they are not terminal names.
REMARKS
Do not use the copy/verify function between this inverter and another type (CC-
Link type FR-E520-KN, DeviceNet type FR-E520-KND) inverter.
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6