About The Control Panel; Names And Functions Of The Control Panel (Fr-Pa02- ) - Mitsubishi Electric FR-E 500 Instruction Manual

3.2 About the Control Panel

3.2 About the Control Panel
With the optional control panel (FR-PA02-
frequency, monitor the operation command display, set parameters, and display an
error.
3.2.1 Names and functions of the control panel (FR-PA02-
Hz RUN
A MON
PU EXT
STOP
RUN
RESET
RUN key STOP/RESET key
" " " " Key indication
Key
key
RUN
key
MODE
key
SET
/
key
key
FWD
key
REV
STOP
key
RESET
" " " " Unit indications, operating status indications
Indication
Hz Lit to indicate the frequency.
A Lit to indicate the current.
Lit while the inverter is operating. Lit to indicate forward rotation, and flickers to
RUN
indicate reverse rotation.
MON Lit in the monitor display mode.
PU Lit in the PU operation mode.
EXT Lit in the external operation mode.
Cover opened
Display
LED 4 digits
Setting key
Mode key
MODE
FWD
Forward key STOP/RESET key
Used to give a start rotation command.
You can select the operation mode or setting mode.
You can determine the frequency and parameter setting.
Used to increase or decrease the running frequency
"
consecutively. Hold down this key to change the frequency.
Press this key in the setting mode to change the parameter
"
setting consecutively.
Used to give a forward rotation command.
Used to give a reverse rotation command.
Used to stop operation.
"
Used to reset the inverter when its output is stopped by the
"
activated protective function.
Description
49
), you can run the inverter, set the
02
Hz RUN
A MON
PU EXT
SET REV
STOP
RESET
Up/down keys
Description
)
02
Unit indication
Operation status
indication
Reverse keys
3