Emerson SW93 Owner's Manual page 5

BP7499 SW93 SW95 SW96.qxp_Layout 1 12/1/14 2:39 PM Page 5
3. Wall Control Installation
3.2
Remove the faceplate and the two 6-
32 screws from the existing wall
switch (retain faceplate and screws
for future use).
3.3
Pull existing wall switch out from the
wall outlet box.
3.4
Disconnect the existing wall switch
wires from the wires in the outlet box
by removing the the two wire
connectors (discard connectors).
3.5
Set the new Wall Control in the OFF
position (full counter-clockwise).
3.6
Pull the knob of the Wall Control
(retain for future use).
(Continued)
WALL OUTLET BOX
SWITCH
6-3 SCREWS (2)
WALL OUTLET BOX
WIRE
CONNECTOR (2)
EXISTING WALL SWITCH
SCREWS (2)
KNOB
WALL CONTROL
5
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: SW93/SW95/SW96
FACEPLATE
NEUTRAL
LEAD WIRES
emersonfans.com