Table of Contents
Advertisement
KANEXPRO
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
4) The Cat5e/Cat6 terminations for HDBaseT devices should be a straight-thru
TIA/EIA T568B standard.
3.2 System Diagram
Transmitter
3.3 Connection Procedure
Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI In port of the transmitter
with an HDMI cable.
Step2. Connect TP OUT port of the transmitter to TP IN port of the receiver through a
CAT5e/CAT6 cable.
Step3. Connect a HDMI displayer (such as HDTV) to HDMI Out port of the receiver
with HDMI cable.
Step4. When using the bi-directional IR control, do the following.
Connect the IR emitter at either end to the IR OUT port on either the
a)
transmitter or the receiver.
When using a powered IR receiver, connect via a 3.5 mm stereo plug to
b)
the IR IN on either the receiver or the transmitter.
Step5. Connect with DC 12V power adaptor to the power port of HDBaseT Transmitter,
HDBaseT Receiver will be energized synchronously with PoC solution.
Receiver
5
EXT-HDBASE70E
IR Remote
Advertisement
Table of Contents
